DIN F7 RISING STEM GATE VALVE

DIN F7 RISING STEM GATE VALVE

A gate valve is a valve designed with the use for getting straight-line flow of fluid with minimum restriction. The goal can be realized by raising a gate or a wedge out of the fluid path. It is necessary to remember that the gate valve can not be used to regulate the flow of fluid. A gate valve can be equipped with a rising stem or not. If the valve is designed with a rising stem, the rising stem can provide visual indication of the valve's position. DIN F7 rising stem gate valve is just a kind of gate valve equipped with a rising stem. Therefore, the position of the valve can be observed through the stem. In addition, the valve can be used for the pipelines in high and medium pressure.

The design of the valve is based on the requirements of DIN3352. DIN F7 rising stem gate valve can be operated by either the manual power or the electric power. When the valve is operated, the nominal pressure can be adjusted between 1.6MPa to 6.4MPa. The suitable media for DIN F7 rising stem gate valve mainly include water, oil and gas. The temperature of media should be regulated between -110 to 600 degrees when the valve is started. Many companies can produce this kind of valve. The valves can be produced according to the concrete requirements of the clients. The clients can decide the size or the end connection of the valve. Different sizes of the valve has different weights and support different pressure. Zhejiang Rako Valve Co.,Ltd. is one of the companies to manufacture DIN F7 rising stem gate valve. Nearly all sorts of the valves can be produced by it.